š„Downloads
SoundSwitch
SoundSwitch v6.11.0
Openwrt Firmwares
This is a system factory to installĀ OpenWRT on TP-Link 841v9 that have the manufacturer firmware.
This image has been build the 25 January 2015 and has been tested on the router.
You need to unrar it and then update the firmware of the router using the *.bin and be patient, that can take up to 10 minutes.
Disclaimer
Antoine Aflalo is furnishing this item “as is”. Antoine Aflalo does not provide any warranty of the item whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item will be error-free.
In no respect shall Antoine Aflalo incur any liability for any damages, including, but limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of the item, whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by Antoine Aflalo.
This is a system update for an existing installation of OpenWRT on TP-Link 841v9.
This image has been build the 25 January 2015 and has been tested on the router.
Disclaimer
Antoine Aflalo is furnishing this item “as is”. Antoine Aflalo does not provide any warranty of the item whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item will be error-free.
In no respect shall Antoine Aflalo incur any liability for any damages, including, but limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of the item, whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by Antoine Aflalo.
NSIS
This is the zip archive containing the unLister script (compiled version also) and it’s md5 plugin. Feel free to recompile it with NSIS.
Disclaimer
Antoine Aflalo is furnishing this item “as is”. Antoine Aflalo does not provide any warranty of the item whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item will be error-free.
In no respect shall Antoine Aflalo incur any liability for any damages, including, but limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of the item, whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by Antoine Aflalo.
DNS Over HTTPS (deb)
Compiled version of DNS-over-HTTPS server and packaged in a deb using fpm.
fpm -s dir -t deb -n doh-server --config-files /etc/dns-over-https/doh-server.conf -v 2.0.1 \ --deb-systemd systemd/doh-server.service \ doh-server/doh-server=/usr/local/bin/ \ doh-server/doh-server.conf=/etc/dns-over-https/
Disclaimer
Antoine Aflalo is furnishing this item āas isā. Antoine Aflalo does not provide any warranty of the item whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item will be error-free.
In no respect shall Antoine Aflalo incur any liability for any damages, including, but limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of the item, whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by Antoine Aflalo.
27th April 2016 at 00:57
My old Windows 7 was failing me… SoundSwitch became victim as well… Windows 10 wasn’t a real choise but I took the leap.
Before anything, I checked if this awesome app was available for Windows 10. It now is and works flawlessly !
Big thanks to all who contributed to this great piece of software š
21st May 2016 at 11:19
Cannot download vcredist 404
please drop auto download from wrong url
22nd May 2016 at 19:58
Fixed in 3.10.1
23rd May 2016 at 12:53
Many thanks!
13th July 2016 at 17:14
After I install, I try to open the program but nothing happens. There is no tray icon.. has anyone else had this issue?
22nd August 2016 at 14:27
Can you try the last beta ?
14th July 2016 at 18:38
Windows 7 and SoundSwitch_v3.10.2.24485_dont run ;-(
22nd August 2016 at 14:27
Can you try the last beta ?
3rd August 2016 at 09:05
Thank you for making this.
9th April 2017 at 16:15
Hi,
My antivirus found that : Trojan.Win32.Reconyc.hwqz
only after installing…
I’m so disapointed but I don’t want reinstall soundswich with this trojan.
best regards
11th April 2017 at 14:45
Hello Chris,
As you can see on the GitHub repository: https://github.com/Belphemur/SoundSwitch/issues/180
We are working with Kaspersky to resolve the issue. It’s not the first time a false positive has been detected on their side for reputable Open-Source software.
It happened to syncthing too as you can see here: https://forum.syncthing.net/t/kaspersky-treats-syncthing-as-virus-false-positive/7659
I’m asking you to be patient, I opened a support ticket with Kaspersky to resolve this issue as fast as possible.
26th April 2017 at 01:29
loved this on my Windows 7. Finally got it installed on my new Windows 10, but it don’t work. What am I missing…;(
15th May 2017 at 18:38
Hello Sam,
Are you up-to-date on your Windows Updates?
15th May 2017 at 22:29
I have used Soundswitch since Windows 7. I now have Windows 10. My only problem with the program is that it will not start “with” Windows. It can be started by clicking the desktop icon. and then it runs and works fine.
In the settings I have the box checked to make it start “with” Windows. but it does not start with Windows. Is there a fix so that it will start with my system?
16th May 2017 at 14:04
Hello sCrow,
Have you tried to uncheck the box than re-check it after?
Sometimes the registry doesn’t get updated. This should fix it.
14th August 2017 at 13:49
I love this so much, works a treat on Windows 10. Thank you very much for sharing š
9th September 2017 at 10:58
I am missing a functionality which was featured in SW 3.0 dev2 – left click on the tray icon cycled default devices. As I had just 2 devices, then just one click was required to change the output. Current version requires an additional click – you have to select the output from the list.
9th September 2017 at 18:58
This feature is still present, instead of a single click, do a double click on the icon š
22nd December 2017 at 17:45
Thank you very much for this program.
2nd January 2018 at 21:39
Thank you very mich for this software. Amazing, well done.
2nd March 2018 at 10:33
Great stuff!!! Keep developing it!
19th April 2018 at 18:12
Nice app.
Just hope it doesn’t have a virus.
Else it would be a very essential software for all gamers.
Kudos.
Do you have a facebook page?
17th May 2018 at 12:43
This software is great, thank you for sharing!
21st May 2018 at 19:42
thank you š
9th August 2018 at 10:11
Installed SoundSwitch tonight, worked perfectly, first time. Does exactly what I hoped for, and does it well. In fact it works a lot faster than doing it the standard Windows way. Thank you for writing this!
Used: SoundSwitch_v4.9.6733.39597_Release_Installer.exe on Microsoft Windows [Version 10.0.17134.165]
7th January 2019 at 23:23
***** 5/5 amazing software and easy to use!
Works like a charm!
15th January 2019 at 10:54
Beautiful. Thanks for SoundSwitch! Really gonna make my work easier.
26th January 2019 at 13:44
The sound switch is great utility. Thank you very much
8th March 2019 at 22:02
I’d request one feature for the sound switcher — being able to toggle to no source at all, in essence, another way to mute for playback or recording devices.
24th March 2019 at 19:54
Perfect! THX!
10th April 2019 at 02:37
Thanks for the useful app!!
27th April 2019 at 21:40
SoundSwitch does what I need it to do. Use it every day. Great piece of software.
11th June 2019 at 07:54
Fantastic piece of software mate, much appreciated. Cheers from Slovakia.
5th September 2019 at 23:14
SoundSwitch software uses a hotkey so the conversion is very convenient and fast. Thank the author very much (y)
Cheers from Vietnam š
19th January 2020 at 08:18
Works perfectly! Thanks a lot!
25th March 2020 at 22:40
I want to say I love your SoundSwitch program! It is EXACTLY what I needed for my desktop. I hated manually clicking through everything to change my audio outputs.
12th April 2020 at 02:34
Sound Switch is a great program, many thanks to the creator š
28th April 2020 at 06:17
FYI this exe is being flagged on Microsoft Edge (Chromium). “SoundSwitch_v5.0.3…exe was blocked because it could harm your device” however it is fine on Google Chrome.
8th May 2020 at 19:34
I’m aware of this. I’ve reported multiple time to Microsoft smartscreen that it’s a safe program.
I’ll do it again.
30th May 2020 at 21:38
Hello.
Thank you very much for the SoundSwitch program.
Now operating the monitor speakers, headphones and external speakers is really very easy. I love such programs to improve the use of equipment … I added a macro to your program supported from the keyboard and now I change the device under one key !!! … Regards
Krzysztof
15th February 2021 at 22:51
Thanks for SoundSwitch! I frequently switch between my speakers + desk mic setup and my headset for gaming. This saves me a lot of hassle every time. Thanks! š
23rd February 2021 at 02:28
Hey, thanks for the program.
Short Question: is there a way to swap the Device that wiretap the sound from my Mic? I dont mean with simple clicking, i know how that works š I want to swap that with a hotkey because i cannot use primary output device in a couple days š
15th June 2021 at 20:23
Isn’t there an option to switch between surround (5.1) and stereo on the same output?
12th August 2021 at 11:28
Hello,
No, this isn’t a feature of SoundSwitch.
6th July 2021 at 20:58
Do you have a 32 bit version of this? Running an ARM laptop
12th August 2021 at 11:27
Sorry, only x86_64, no arm version or x86 version.
12th August 2021 at 10:39
Dead link?
SoundSwitch
Shortcode Error: GitHub repository has no release assets. Currently, the download count stored on GitHub is only available for assets.
12th August 2021 at 11:26
Thanks for your comment.
I’ve fixed the page š
21st August 2021 at 11:36
Works for Win11 Home.
5th September 2021 at 12:00
Thank you very much for the SoundSwitch program.
24th November 2021 at 10:31
Awesome software! Very useful. Thanks!
13th February 2022 at 15:16
Thanks for Soundswitch. It does the work very well.
23rd April 2022 at 11:18
Is there a “How to” section for the SoundSwitch thing ? I’m tryina to change the hotkey used to switch between the selected audio sources, but it’s just adding ” + Clear ” to the end of my keystroke, it only recognizes shift, alt, ctrl. no other key.
26th November 2023 at 10:40
I have been using SoundSwitch for a few years. I am currently using it on 2 Windows 11 computers. I tend to switch between gaming, business apps, and listening to music. SoundSwitch makes the transition so simple and reliable. Wonderful program.